Remote Wireless Entry Alerts
Sort By:
Dakota Indoor Motion Sensor/Receiver 2500, IRDCR-2500Dakota Indoor Motion Sensor/Receiver 2500, IRDCR-2500The Dakota Alert IRDCR-2500 is perfect for alerting you of people entering or in designated areas. The infrared sensor transmitter operates on one standard 9 volt battery and may be mounted over a doorway, entry way, entry hallway, garage or anywhere that you need to be aware of people entering.

The IR-2500 is a passive infrared detector capable of monitoring an area up to a 100° wide. With the integral mask, the detection area can be narrowed down to 20° or anywhere in between. With the swivel mount, the IR-2500 sensor an be adjusted right to left up to 80° and up and up to 50°. With three sensitivity settings, the IR-2500 can detect a person up to 12 feet, 25 feet and 40 feet away.

The IR-2500 is powered by one 9 volt battery (not included) and is designed for indoor or light duty outdoor

Door/Window Entry Alert Kit, LONG RANGE, WD-434RTLDoor/Window Entry Alert Kit, LONG RANGE, WD-434RTLProtect your home and family with a simple security system that monitors up to 4 entry ways to your home. The Long Range Door / Window Alert Kit is a magnetic contact sensor system that will monitor any entry door or window within your house, notifying you instantly via an audible alarm or alert and visual indicators if the entry is opened. Up to 800' line of sight wireless range.

Find additional Skylink Entry Alert Sensors, Products and Accessories
ENFORCER Extra Wireless Speaker, Seco-LarmENFORCER Extra Wireless Speaker, Seco-LarmAdditional wireless speaker / electronic chime. This speaker is to be used with Seco-Larm item 80-550, Wireless Entry Alert Beam System.
ENFORCER Wireless Entry Alert System with Chime, Seco-LarmENFORCER Wireless Entry Alert System with Chime, Seco-LarmPerfect for monitoring an entry way / entrance or use as an entrance alarm. Other applications: offices, schools, warehouse, vehicle detection, etc. Retro-reflective design ( electric eye laser IR beam ). Sensing Range: Up to 22 feet (7m). Will make "ding-dong" sound or siren sound (at wireless receiver up to 320 feet away) when the invisible sensing beam is interrupted. Speaker volume can be adjusted or turned off. When in siren mode, sounding time is adjustable from 3 to 30 seconds.
Entrance Alert Set, Rodann, RX/TX-1000AEntrance Alert Set, Rodann, RX/TX-1000ARodann entrance alert set RX/TX-1000A for open or closed doors or open entry ways. This unique set can also be used on warehouse roll up doors, inside display cabinets, restricted area protection, or (patio, bedroom, bathroom) window alerting device.
Long Range Wireless Door Entry Alert, UTDCDCR-2500Long Range Wireless Door Entry Alert, UTDCDCR-2500The Door sensor/transmitter has a magnetic door contact, so that when the entry door is opened by a visitor / customer, it sends a wireless entry alert chime to the DCR-2500 receiver that is power by an AC adapter and can be plugged in up to 1500 feet away (depending on walls, building materials, etc.).
The receiver for this Long Range Wireless Door Entry Alert has four form “C” relay outputs and one 12VDC output. The output durations are adjustable up to 10 minutes. The receiver will play one of four different tunes that are selected at the transmitter so that different zones can be distinguished.
Long Range Wireless Point to Point Entry Alert - Twin Photobeam, up to 90 feetLong Range Wireless Point to Point Entry Alert  - Twin Photobeam, up to 90 feetLong Range (up to 1500 feet line of sight) Wireless Remote Entry Way Alert - The Twin Photobeam (sender & receiver) can create an invisible alert / alarm activation line up to 90 feet between Photobeam sender (transmitter) & receiver. The receiver will play one of four different tunes that are selected at the transmitter so that different zones can be distinguished. The wireless receiver is powered by a 12VDC transformer.
Long Range Wireless Point to Point Entry Alert - Single Photobeam, up to 50 feetLong Range Wireless Point to Point Entry Alert - Single Photobeam, up to 50 feetLong Range (up to 1500 feet line of sight) Wireless Remote Entry Way Alert - The Single Photobeam (sender & receiver) can create an invisible alert / alarm activation line up to 90 feet between Photobeam sender (transmitter) & receiver. The receiver will play one of four different tunes that are selected at the transmitter so that different zones can be distinguished. The receiver is powered by a 12VDC transformer. It also offers a 5 minute exit delay so you can leave the house without disturbing any occupants as well as a reminder beep and counter function.
Long Range Wireless Remote Entry Way Alert - Reflective BeamLong Range Wireless Remote Entry Way Alert - Reflective BeamLong Range (up to 1500 feet line of sight) Wireless Remote Entry Way Alert - IR Reflective Invisible Beam (up to 35 feet line-of-sight). The receiver will play one of four different tunes that are selected at the transmitter so that different zones can be distinguished. The receiver is powered by a 12VDC transformer. It also offers a 5 minute exit delay so you can leave the house without disturbing any occupants as well as a reminder beep and counter function.
Motion Alert Kit, LONG RANGE, HA-434RTLMotion Alert Kit, LONG RANGE, HA-434RTLThis sensor and receiver kit is designed to monitor movement around your house, notifying you instantly if motion is detected via audible and visual indicators. The wireless kit can distinguish up to 4 sensors up to 800' line of sight.

Find additional Skylink Entry Alert Sensors, Products and Accessories
Optex Wireless 2000 Entry Announcer, RCTD-20Optex Wireless 2000 Entry Announcer, RCTD-20The OPTEX Wireless 2000 Driveway and Entry System alerts you by 3 different chime tones and/or activates other electric devices (e.g. door strikes, lights, siren, CCTV) with relay output on the receiver (RC-20, item 80-506). The new 2000ft.* transmission range can also be extended by using the TR-10U repeater.
Portable Receiver Pager, model PR-2500Portable Receiver Pager, model PR-2500Additional Pager for use with multiple input UT-2500 universal transmitter (item 60-104), or motion sensor (item 60-601), or pager system (item 60-102).

The PR-2500 is pocket-sized receiver that is compatible with all of our 2500 series transmitters. It is capable of receiving and storing alert signals from up to 4 zones. Each zone can store up to 400 events with a date/time stamp. In addition, each zone can store up to 999 events without the date/time stamp. With the counter funtion you will know when the monitor was activated.

The rechargable Li-Ion battery will hold a charge for up to 10 days. In addition to the LCD display, the PR-2500 will also give an audible tone for each of the

Solar Powered Wireless Infrared Beam Alert System, BBA-2500Solar Powered Wireless Infrared Beam Alert System, BBA-2500This system can be used across driveways as a driveway alert. It can be used to alert you when someone walks into your sales lot; or when they cross the 300 foot invisible beam outlining one side of your property. The BBA-2500 is a solar powered wireless infrared break beam system that is simple to install and requires no wiring. The break beam sensors are powered by lithium ion batteries that are recharged through the solar panels during the day. Because the unit is self powered there is no need to run wires for power. Installation time can be as little as a few minutes. The infrared sensing terminals can be mounted up to 300 feet apart and will send a signal back to the DCR-2500 receiver up to half mile away* anytime someone passes between the point to point sensors.
Speaker (wired) for Rodann Alert wireless ReceiversSpeaker (wired) for Rodann Alert wireless ReceiversAdditional wired Speaker for Rodann Entry Alert wireless Receivers.
Tone/Vibrating Alarm Property Pager System, PRUT2500Tone/Vibrating Alarm Property Pager System, PRUT2500Amazing 2000' distance on this paging system. Transmitter may be used stand-alone paging system or connected to the relay output (if equipped) of our entry alert receivers.
Voice Alert 6 Extra Receiver, VA6000RVoice Alert 6  Extra Receiver, VA6000RThe Cross Point Voice Alert Receiver / Speaker unit consists of a receiver, voice recording/playback system and speaker. It includes controls to allow for power input, recording of up to six voice messages (in your voice), and programming of each Sensor / Transmitter to activate a voice message. This Receiver / Speaker also includes, connections to activate other devices.
Voice Alert System 6 - Wireless Motion Sensor Monitor AlertVoice Alert System 6 - Wireless Motion Sensor Monitor AlertWould you like to be alerted when ...
Cars are coming up the driveway � Children go inside your tool shed � Intruders approach the front or backyard � Someone enters your garage � Visitors are walking to the front door � Your parked boat or motor home has been boarded � Kids or pets are trampling your flowers � Someone is in the pool

Voice Alert System-6 is a new annunciator system featuring wireless passive infra-red sensor / transmitters and a remote receiver/speaker base unit. Users record their own alert messages and are then notified with their own voice message when activity in a monitored area is detected.
Voice Alert TXPCBB Specialty SensorVoice Alert TXPCBB Specialty SensorVoice Alert's TXPCBB sensor/transmitter adds a new layer of functionality to the Voice Alert System-6 Wireless Annunciator. The new transmitters enable any type of "sensing device" with output closures/openings (NC/NO) to trigger user recorded messages on a Voice Alert base unit receiver/speaker (item 30-211). Now you can get wireless notification from devices such as smoke alarms, CO (carbon monoxide) sensors, window, gate or door contacts, push button devices, water level indicators, a vibration switch, etc.
Voice Alert Wireless Door Entry Announcer, VA6DEAVoice Alert Wireless Door Entry Announcer, VA6DEAThe Voice Alert System-6 wireless door entry annunciator allows voice-recorded messages to identify activity for up to six monitored zones. Voice Alert Wireless Door Entry Announcer uses a wireless transmitter mounted next to the door that has a short 2 lead wire to an included magnetic door sensor. A custom message (user recorded) will be played (at the wireless remote receiver) when a door with contact and transmitter is opened.
Wireless Remote Door Entry Alert Chime, WRDCWireless Remote Door Entry Alert Chime, WRDCWireless Door Entry Alert Chime for remote (up to 600 feet away) door opening notification. Activation is by magnetic door contact attached to wireless transmitter. On/Off switch, volume control. Allows chime selection by door and/or multiple doors to be monitored. Optional pager receiver available, item 60-103.
1 2