Voice Alert  6 Extra Sensor, VA6000T
Voice Alert  6 Extra Sensor, VA6000T
va-6000s circuit board
Click to enlarge image(s)

Additional Motion or 'NO' contact sensor for your Voice Alert System 6 annunciator for (Item #30-211).


Sensor/Transmitter
  • Monitored range: 40 X 40 feet when installed at 7 1/2 feet above the ground.
  • Passive infrared (heat) motion detection technology.
  • Installation kit includes double stick mounting tape and screws.
  • Lightweight all-weather construction for use indoors or outside.
  • 9V alkaline battery lasts up to 1 year.
  • Transmits up to 1000 feet to Receiver/Speaker in open space and up to 300 feet through walls.
  • LED transmit display when motion is detected (on/off switch selectable).
  • Powerful 433.92 MHz transmitter.
  • FCC Part 15 approved.

What are the features of the VA-6000T Sensor/Transmitter? The VA-6000T Sensor / Transmitter is really a 2-in-1 device that can can be triggered by:
  • PIR (motion sensor) OR
  • Triggered by an external device
The contact block, J1 (item "D" in the diagram), enables the unit to function as a wireless transmitter when triggered by other devices such as magnetic door contacts, smoke alarms, pressure mats, or any other normally-open device.

The SW2 switch (item "C" in the diagram) comes set from the factory in the ON position. With the switch in the ON position, the Sensor / Transmitter is triggered by the PIR motion sensor.

When the SW2 switch is in the OFF position the PIR motion sensor is deactivated. The only way to trigger the transmitter is through an external device connected to contact block J1 (item "D" in the diagram).

Voice Alert's VA-6000T is the only Sensor/Transmitter that offers this level of functionality.
Submit a Review...