Dakota Pressure Sensor Wireless Driveway Alert - Air hose, DCRH-2500
Dakota Pressure Sensor Wireless Driveway Alert - Air hose, DCRH-2500
Click to enlarge image(s)
The DCRH-2500 is a very reliable and easy to install driveway alarm. The transmitter operates on one 9-volt battery and has 25' of 3/8" diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the DCR-2500 receiver up to 1/2 miles away*. The transmitter is weatherproof and meant for exterior locations. Up to 4 zones can be monitored with additional transmitters. The transmitters can be programmed so they will each sound a different tone at the receiver. The DCR-2500 is the receiver for the DCRH-2500 system. The DCR-2500 plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level. The DCR-2500 is equipped with four form “C” relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and relays can be set to activate for 1 second, 10 seconds, 60 seconds or 10 minutes, if this is desired. The tones will still sound for several seconds. Operating Range: -30°F to 120°F *Actual range will vary depending on the local terrain.

Optional Extra Loud Siren/Sounder available for commercial businesses with a high level of background noise or equipment / machinery running, see item 60-206.

Pressure Sensor/Transmitter Instructions

Receiver Instructions

Submit a Review...