Long Range Wireless Door Entry Alert, UTDCDCR-2500
UTDCDCR-2500
Long Range Wireless Door Entry Alert, UTDCDCR-2500
Wireless Entry Alert ReceiverMagnetic Door contact & wireless transmitterWired magnetic contacts for optional installation
Click to enlarge image(s)
The Door sensor/transmitter has a magnetic door contact, so that when the entry door is opened by a visitor / customer, it sends a wireless entry alert chime to the DCR-2500 receiver (which is power by an AC adapter and can be plugged in up to 1500 feet away (depending on walls, building materials, etc.). The wireless sensor/transmitter also has a push button that can be used as a panic button, pager signal or a wireless doorbell. There is also terminals for both a normally open (N/O) and/or normally closed (N/C) input. These inputs can be used with any sensor contacts. Now you can have your favorite sensor send a wireless signal up to 1/2 mile back to the DCR-2500 alert receiver (item 60-609), depending on environment and terrain.

The DCR-2500 is the receiver for this Long Range Wireless Door Entry Alert. It has four form “C” relay outputs and one 12VDC output. The output durations are adjustable up to 10 minutes. The receiver will play one of four different tunes that are selected at the transmitter so that different zones can be distinguished. The receiver is powered by a 12VDC transformer. It also offers a 5 minute exit delay so you can leave the house without disturbing any occupants as well as a reminder beep and counter function.

System includes quantity 1 (NC) normally magnetic door contact for more difficult installations and/or where the UT-2500 transmitter cannot be mounted on door frame (this 12" wired contact would optionally replace the contact included with transmitter). Up to 4 total wireless long range door contact transmitters (item 00-211) can be added.

Optional Extra Loud indoor Siren or Steady Tone Electronic sounder (item 60-206) available for high noise areas.




What's Included:
- Qty 1: Wireless 4 zone, chime selectable, relay output Receiver
- Qty 1: Long range transmitter and built-in magnetic door contact
- Qty 1: NC magnetic contact w/12" wire leads - may not be needed

What may be required:
- additional wire; depending on your installation.
- wire connectors - screw-on, butt, crimp, telephone/data/splice, or solder, insulating tape, etc.


Sensor/Transmitter Instructions

Receiver Instructions

Addendum to Instructions
Submit a Review...